Catalog

Lock case with an automatically deadlocking latchbolt.
The lock must always be equipped with handles,
as the latchbolt is retracted with the handles only.
The deadlocking is controlled by a snib in the forend.
When the snib is in deadlocking mode, the door is opened
by turning the outside key 180° or the inside thumbturn 90°.
The handles are then activated, and the latchbolt can be
retracted.
Snib position:
UP = Deadlocking, latchbolt protrudes 21 mm. The lever
handles are activated by the key or the thumbturn.
DOWN = Latchbolt protrudes 14 mm.
The door is opened with the lever handles.
The lock case LC100 is fitted with a feature to prevent
unauthorized use of the snib. The snib is locked to
the deadlocking mode by turning a set screw, located
below the snib, about two turns anticlockwise by a hexagonal
key, until the screw stops and is opened by turning the screw
clockwise.
LC100X is the microswitch version of the lock. The switch
changes it’s status when the bolt has protruded to 21 mm.
Following striker plates are recommended to be used with
a microswitch locking box: 4692, 4693.
Striker plate 4690, 4691, LP711, LP714, LP721, LP731
Finish Fe/ZL
Cylinder ABLOY® C, N, T, U
Fire resistance: Wooden doors EI115 – EI160 and
EI215 – EI260,
Metal doors EI115 – EI1120 and
EI215 – EI2120
Mortise standard SFS 5209